Payment & Shipping Terms:
|Type:||Inclined Belt Conveyor||Surface:||Flat And Pattern|
|Material:||Rubber||Material Feature:||Heat Resistant|
|Usage:||Material Transimission||Warranty:||12 Months|
portable conveyor systems,
portable belt conveyor systems
Large Loading Capacity Corrugated Sidewall Belt Conveyor System
Description of Corrugated Sidewall Cleated Belt Conveyor :
Sidewall cleated belt conveyor is continuous transporting equipment of loose bulk materials such as coke, coal, limestone, sand and gravel. It adopts high quality conveyor belt with corrugated sidewall and horizontal baffle. Sidewall belts are used to convey material up inclines. The sidewall increases the carrying capacity of the belt and prevents product from falling off the edges of the belt. Hot vulcanization provides a 5x greater adhesion between the belt and sidewall, eliminating the need for bolting the sidewall to the base belt. Greater adhesion also prevents the sidewall from lifting and separating from the base belt, extending the belt life.
Application of Corrugated Sidewall Cleated Belt Conveyor:
Sidewall cleated Inclined belt conveyor systems is mainly used in arbor, metallurgy, mining, electricity, coal, foundries, construction, food, cement works, fertilizer, etc.
Specification - Techincal Parameter :
|Sidewall Height (mm)||Conveyor Quantity at certain angles Q(m3/h)|
1.low maintenance cost.
2.Large transport capacity, and it can avoid material spilling effetely.
3.The belt can facilitate switching from horizontal to inclined conveying and from inclined to horizontal conveying.
4.It saves a lot space as it allows material conveying at 0-90 degree.
5.The sidewall belt conveyor is widely used in coal, food, building, chemical, water and electricity and metallurgy industry.
Incline Corrugated Sidewall Cleated Rubber Belt Conveyor
The horizontal loading section a deflection wheel bends the belt into the feeding of the bulk material takes place on a mostly horizontal feed path, where the side wall belt is supported by loading impact idlers. The feeding of the conveyed material can be achieved by direct feeding from a hopper, over a chute, a feeding belt or a feeding pulley. The selection of the optimum feeding station depends on the properties of the bulk material and the belt speed of the vertical conveyor. The upward and downward strands are encased from the bottom to the top. Substructures or support rollers are not necessary in this section.
The vertical section leads over a deflection curve into the horizontal discharge section. The deflection curve is made up of a number of high specification pulleys. These pulleys experience the vectored load of deflecting the belt tension from vertical to horizontal.
At the drive pulley, the bulk material is discharged and the belt is returned to the back going strand. Depending on the bulk material properties, the drive pulley is followed by a beater wheel for belt cleaning in the return side. The beater is self-driven. Material that fails from the belt goes into the main delivery chute. Lateral deflection wheels turn the belt from the horizontal back to the vertical.
We can choose the most suitable the machine according to customer requirements.
1. What is the conveying material and its physical characteristics? such as bulk density, feeding size, temperature, mositure content etc.
2. What is the processing capacity of the conveyor?
3. What is the inclination angle of the conveyor?
4. What is the lifting height (distance between inlet and outlet)?
5. What is the length of horizontal section?
Contact Person: Shirley